Field Container Model
OUTER DIMENSIONS
WIDTH:2,43 MT
LENGTH: 12,19 MT
HEIGHT: 2,90 MT
OUTER DIMENSIONS
WIDTH:2,43 MT
LENGTH: 12,19 MT
HEIGHT: 2,90 MT
INSIDE DIMENSIONS
Width:2,33 MT
LENGTH: 12,05 MT
HEIGHT: 2,68 MT
INSIDE DIMENSIONS
Width:2,33 MT
LENGTH: 12,05 MT
HEIGHT: 2,68 MT
EMPTY OWN WEIGHT: 4000 TON
LOAD BEARING CAPACITY : 30,480
CUB METERS: 76
EMPTY SELF WEIGHT: 4000 TON
LOAD BEARING CAPACITY: 30,480
CUBIC METERS: 76
It comes with ready-made air conditioning system/air inlets-outlets.
It has a lighting system.
It can be easily transported and moved due to its portable structure.
It can be easily put into use for field hospitals in necessary cases such as disaster, emergency, etc.
It was intended for hospitals and facilities that have no sufficient area and do not meet physical conditions.
It is never affected and damaged by temperature, humidity and dust.
When necessary, additional tube filling system can be easily installed.
The system has a dedicated electrical panel.
It is manufactured in such a way that it will not be affected by climate changes by insulating the inner of the container.
It compresses air to the desired pressure level.
It accumulates the required volume of air for the PSA generator
G-General Purpose Protection Filter: Removal of particles down to 1 micron including coalesced liquid water and oil providing a maximum remaining oil aerosol content of 0.5 mg/m³. Automatic discharge unit.
H- High-Efficiency Oil Removal Filtration: Removal of particles down to 0.01 micron including water and oil aerosols providing a maximum remaining oil aerosol content of 0.01 mg/m³. Automatic Discharge Unit
It removes moisture in the air (dehumidify) by cooling.
7” Touch Color Screen.
Control monitor, electronic control panel (Liquid and dust-proof)
When ion exchange bed is filled with this, N2 molecules are trapped and O2 molecules continue to flow.
It flows from PSA generator towards production tank and is ready for use.
It can be adjusted between 4 and 6 bar.
(0.001 Micron)
It is used to filter oil vapor and to remove hydrocarbon odor. The remaining oil amount in the filter outlet is 0.003 mg/m3 @ 21oC. (If there are G and H grade filters at the inlet)
Capacity Table by Mobile Model Products 
