Compact Model
Our Compact Model Oxyvital systems operate in the pressure range of 4-6 Bar (g).
It is intended for hospitals and facilities requiring oxygen that have no sufficient area.
The whole system and its all components are CE certified.
The whole system is guaranteed for 2 years and has a 10-year spare parts warranty.
When the purity of oxygen drops below 90%, it automatically shuts down and switches to safe mode.
Cylinder filling unit and filling ramp can be optionally added so that the system capacity is not exceeded.
The compressor pressure is 8 Bar (g). The maximum noise level is 70 Decibel.
Production loss is 0 thanks to 24/7 operation.
The return-on-investment period varies between 12-24 months depending on capacity.
Compact Model Oxyvital PSA Oxygen Generator Systems: Oxyvital 2, Oxyvital 4, Oxyvital 6, Oxyvital 7, Oxyvital 11, Oxyvital 17, Oxyvital 21
Full compliance with
93/42/EEC MDD (Medical Device Directive), PED (Pressurized Equipment Directive) and CE medical certification, ISO 13485:2016, ISO 9001:2016, ISO 14001:2016 standards.
Rapid Rate of Investment (1-2 years)
Overall cost reduced by up to 80% as compared to cylinders. 40% less energy consumption than other available oxygen generators̈. ̈No constant spending (refilling, delivery, and transportation costs, etc.)
Stand Alone Process
Full automation & independenẗ process. Production of gas you need at anywhere and anytimë. No lack of oxygen due to the exhaustion of gas.
It compresses air to the desired pressure level.
It accumulates the required volume of air for the PSA generator
G-General Purpose Protection Filter: Removal of particles down to 1 micron including coalesced liquid water and oil providing a maximum remaining oil aerosol content of 0.5 mg/m³. Automatic discharge unit.
H- High-Efficiency Oil Removal Filtration: Removal of particles down to 0.01 micron including water and oil aerosols providing a maximum remaining oil aerosol content of 0.01 mg/m³. Automatic Discharge Unit
It removes moisture in the air (dehumidify) by cooling.
7” Touch Color Screen.
Control monitor, electronic control panel (Liquid and dust-proof)
When ion exchange bed is filled with this, N2 molecules are trapped and O2 molecules continue to flow.
It flows from PSA generator towards production tank and is ready for use.
It can be adjusted between 4 and 6 bar.
(0.001 Micron)
It is used to filter oil vapor and to remove hydrocarbon odor. The remaining oil amount in the filter outlet is 0.003 mg/m3 @ 21oC. (If there are G and H grade filters at the inlet)
Capacity Table by Mobile Model Products 
